PMMI Lighting Motion Sensors
PMMI motion sensors are mounted using a standard single gang box with Decora cover plates, and are prewired with RJ45 connectors for easy installation. Standard wall and ceiling mount sensors are available for closets and living spaces, and a long distance detection model is available for high ceiling applications.
- Triggers illumination in an area when motion is detected.
- Interfaces to the Control Center using a Cat5/6 cable.
- No additional cabling (e.g. power) is required.
Standard Detection – Ceiling Mount Motion Sensor
- Detection Distance: Max. 5m
- Field of View: 94° x 82°
- Detection Zone: 64 Beams
- Detection Condition:
- The temperature difference between the target and the surrounds must be higher than 4°C
- Movement speed: 1.0 m/s
- Target Concept: Human body with an approximate size of 700 x 250 mm
- Target moving direction: Crossing the detection beam.
Long Distance Detection – Ceiling Mount Motion Sensor
- Detection Distance: Max. 12m
- Field of View: 102° x 92°
- Detection Zone: 92 Beams
- Detection Condition:
- The temperature difference between the target and the surrounds must be higher than 4°C
- Movement speed: 1.0 m/s
- Target Concept: Human body with an approximate size of 700 x 250 mm
- Target moving direction: Crossing the detection beam.
Standard Detection – Wall Mount Motion Sensor
- Detection Distance:
- 1st step lens: Max. 12m
- 2nd step lens: Max. 6m
- 3rd step lens: Max. 3m
- Field of View: 40° x 105°
- Detection Zone: 68 Beams
- Detection Condition:
- The temperature difference between the target and the surrounds must be higher than 4°C
- Movement speed: 1.0 m/s
- Target Concept: Human body with an approximate size of 700 x 250 mm
- Target moving direction: Crossing the detection beam.
