PMMI Lighting’s AC Interface enables control of high-voltage AC loads (on/off only) through relays switched using low voltage inputs from the LED drivers over 18 AWG zip cord. Each relay can switch AC loads of up to 10A at either 120 or 240V.  Some appliances controlled through the AC interface can be ceiling and exhaust fans as well as chandeliers and vanity lights not using the PMMI bulbs.

Available in the following configurations:

  • with up to 16 Position (shown below)
  • with up to 24 Position
  • with up to 32 Position
ALL connectors on the end of ALL cables should have NO OX on them. We believe so strongly about this that PMMI Lighting provides one free container for every system sold.